FEAXIOM
The new generation

The AI-driven structural analysis mode: minimum input.

Show FEAXIOM a picture of the part, or give it a CAD model. It proposes the dimensions, material, loads and supports, you check them on a review screen, and a full 3D finite element analysis is run. The Workbench is traditional finite element analysis; FEAXIOM is the mode we are building toward.

What it does

From a picture of the part to a finite element model.

FEAXIOM has its own window, separate from the Workbench, built around one idea: you should only have to give what the AI cannot work out for itself. Upload a picture (a photo, hand sketch or drawing) or a CAD model. The AI reads what it can and puts it on a review screen that you can edit. Then the 3D model is built, meshed and solved, and you get the usual results.

Picture or CADphoto, sketch, drawingor STEP, IGES, BREP, STLAI readsdimensions, material,loads and supportsReview screenred unread, amber assumedyou edit anythingFull 3D modelmesh and solveno symmetry cutsUsual resultsstress, frequencies,buckling, thermalManual modeno AI neededCheck and correctbefore the run
The AI only proposes the model. You review and correct it before anything is solved.
1 · UPLOAD

Picture or CAD model

A photo, sketch, drawing or screenshot, with several views of the same part if you have them. Or a CAD file (STEP, IGES, BREP, STL), where the exact solid is used and the picture only shows loads and supports.

2 · READ

The AI proposes

Dimensions, features, material, supports, loads and analysis type. A value it cannot read is never invented: it is marked red for you to fill in. A value it had to assume is marked amber.

3 · REVIEW

Edit anything

Tables for geometry, material, supports, loads and mesh, beside a picture of the model. What you see is exactly what is sent to the solver. Place or move loads and supports by clicking on the faces.

4 · SOLVE

Full 3D finite element

No symmetry cuts. The usual contour plots, values and model checks, and the model can be sent on to the Workbench.

Two modes

Traditional FEA vs FEAXIOM.

They are two ways into the same finite element analysis. Use the Workbench when you want to define everything yourself. Use FEAXIOM when you want a first model with the least typing, and are ready to check it.

Traditional FEA: the WorkbenchFEAXIOM: the AI-driven mode
Where you startA CAD file, a ready-made example, or a part you build from features.A picture, sketch or drawing of the part, or a CAD file.
What you enterEvery dimension, the material, loads, supports, mesh settings and the analysis type, yourself.The picture and, if you like, a few notes. The AI proposes the rest; you review and correct it.
Where the model comes fromYou build it, step by step.The AI proposes it; you check and edit it on a review screen before anything is solved.
ControlFull control: geometry editor, mesh controls, contacts and the complete set of Workbench analysis types.Editable tables for geometry, material, supports, loads and mesh, with fewer options than the Workbench. The model can be sent on to the Workbench for full control.
Analysis typesAll the Workbench analysis types.Static stress, natural frequencies, linear buckling, steady-state thermal and thermal stress.
MaterialThe Workbench material options, including composites.Linear elastic and isotropic.
AI neededNo.Reading a picture needs the account owner's AI key. CAD files and manual mode need no AI.
Who checks the modelYou, as you build it.You. The first model can be wrong: values it could not read are marked red, values it had to assume are marked amber.
Best forDetailed models, contacts and the final analysis of a part.A quick first pass on a part that is not in CAD yet, with minimum input.

About the Workbench

Read this first

What FEAXIOM is, and what it is not.

A best-effort first model that you verify. The reading can be wrong. Check every value against your part before you run, and repeat the run with a finer mesh before you rely on a number. The analysis is linear elastic and isotropic, so use the Workbench for composites. Peak stresses under point loads, at sharp corners and at fixed edges are numerical artefacts, so judge the stresses away from them. The result is an engineering aid, not a certified analysis.
Picture reading runs through our server. Signed-in licensed users can read pictures from the online edition and from the Windows version (which needs an internet connection for this step only). Readings are limited per hour and per day, and the picture is sent from our server to the AI service and is not stored. Everything else works without the internet.
Your work is saved in your project folder. Choose a work folder once. Each job is saved in its own folder under your project (the part description, the CAD file, the report, the result tables and a Workbench file), and the last 5, 10 or 20 jobs can be reopened from the Work folder panel. The Workbench and the calculators use the same project folders and the same file header, so a file always says which tool made it.
Manual mode needs no AI. Start from a ready-made example or an empty model and fill in the tables yourself, or load a CAD file and place the loads and supports by clicking on the faces. You get the same review screen, the same solve and the same results.
Sign in to use it. FEAXIOM is part of the online edition and follows the same access as the Workbench: the same sign-in, and the same logins can open it.

Try FEAXIOM on your own part.

Contact us to get access to the full Workbench, FEAXIOM and all calculators.